QA: Lost Detail After Moulding
问答：翻模后纹理细节丢失
标签：细节丢失,黏度,脱模剂,低黏度,刷涂
细节丢失常因硅胶黏度过高填不满微纹，或脱模剂过厚糊住细节。改用水性脱模剂薄喷，或换低黏度（<20000 cps）硅胶；对极细纹可先刷涂一层硅胶再灌注。原样喷少量爽身粉显纹也能帮助检查。
Lost detail usually means silicone too viscous to fill micro-relief, or release agent too thick. Use a thin water-based release or lower-viscosity silicone (<20000 cps); for very fine lines, brush a first coat before pouring. Light talc dust on the original helps reveal detail during check. ---